Just In Case

Charging the Vibrator: Place the vibrator in the case and close the lid. The lights will illuminate and flash while the product is charging. The number of lights illuminated reflects the current battery power level. When the product is fully charged, the lights will stop flashing and stay on. Your case holds two full charges for your vibrator, for convenient, wireless charging on the go.

Case Charging: Use the provided USB power cable and insert the charging pin into the opening on the back of the case, then plug the other end into a USB port. Close the cover of the case. The lights will illuminate and flash while the product is charging. The number of lights illuminated reflects the current battery power level. When the case is fully charged, the lights will stop flashing and stay on.

UV Sanitizer Information: The sleeve can also be used to sanitize the vibrator. Before UV disinfection, wash the toy with clean water and Cleansing Mist. Spray Cleansing Mist on toy, rinse under running water, wipe and towel dry as needed. The toy must be completely dry before inserting it into the case. For UV disinfection, insert the vibrator into the case and gently rotate until the light in the case compartment illuminates and remains solid. The solid light inside the case compartment indicates that the UV sanitizer has been activated. If the light is flashing, the vibrator is not aligned inside the case. Close the cover of the case and wait 20 minutes to complete a disinfection cycle. Do not open the cover before the cycle is complete, as this will interrupt the disinfection. If the case is accidentally opened before the cycle is complete, close the case lid to restart the cycle.

Using the Vibrator: To turn it on, press and hold the button for 3 seconds. To switch between vibration speeds and pulsating patterns, press the button. To turn it off, press and hold the button for 3 seconds.

Wash before and after each use. For best results, use Cleansing Mist.